1. After the user receives the optical cable, check the certificate of conformity of the optical cable and the optical data on the disk, check the cable reel number, model, number of cores and length, etc., and check whether the outer packaging is damaged.
2. When laying the optical cable, a piece of traction rope must be connected to the optical cable strength member and fixed with a mesh cover or tape and the sheath. If it is to be used on the optical cable, a special rotating pulling head must be added between the traction rope and the optical cable strength member, and the outer sheath of the optical cable should not be pulled directly.
3. Arming the optical cable with a length of more than 2KM, it is not allowed to be put all the way from the beginning to the end at one time, and the optical cable reel must be placed in the center position and placed in a figure-8 shape to both ends.
4. When unloading the GYTA fiber optic cable from the car, use a forklift or crane hoist to place the fiber optic cable on the ground.
5. In field construction occasions, remove the cable from the car, and place a flat plate between the car platform and the ground to form a 45-degree slope. Use a rope to pass through the middle hole of the optical cable and pull the person, which is the cable. Glide down the plank slope.
6. When unloading the GYTA optical cable, it should be strictly stacked and flat. It is strictly forbidden to drop the optical cable vertically from a high place or place the strong impact optical cable to cause damage.
If you choose a professional manufacturer, Hunan GL Technology Co., Ltd. will give you a satisfactory experience, you will get excellent quality and Price.