In the process of installing the optical cable, it is necessary to go through the process of welding. Since the ADSS optical cable itself is extremely fragile, even if it is subjected to a slight force, it is easy to be damaged. Therefore, during the specific operation process, it is necessary to complete this difficult work with great care and high requirements. In order to complete this task perfectly, relevant experts concluded and found that ADSS optical cable fusion has the following three precautions.
1. Pay attention to the preparations before welding:
In order to avoid electric shock, in particularly humid weather, if you do this work, you should first take grounding measures. And the corresponding length should be calculated before the ADSS optical cable is spliced, and the side with the heavier force should be cut off. In order to achieve better welding, the light should be set aside for a specified distance, and the length of the outer skin pine magnetic tube should be determined according to the situation. At the same time, it should be noted that the internal structure at night must be avoided when broadcasting, so it must be well controlled The depth of the blade.
Second, be careful to operate:
When wiping, in order to avoid hurting the inside of the ADSS optical cable, do not wipe from the root of the tip to avoid hurting the end, and avoid twisting the ADSS optical cable during any operation, otherwise, it will easily cause damage. It is also necessary to protect the eyes and skin of the operator at the same time, especially when using the laser, do not stare at the end face of the fiber. After peeling off the surface layer, the fiber will stab the skin, so you need to be very careful when welding. And some waste materials cannot be disposed of casually, they should be collected and disposed of according to regulations.
3. Pay attention to taking corresponding measures according to the weather conditions:
In winter, when the temperature is relatively low, in order not to be affected by the low temperature, the genuine ADSS optical cable manufacturer reminds that the electric heater should be used to increase the ambient temperature. It is best to wrap the fusion splicer with an electric blanket to increase its temperature. in order to ensure that it works properly. If the weather is relatively humid, ADSS optical cable manufacturers suggest that moisture-proof measures should be taken, especially the heat-shrinkable tube should not be taken out in a hurry, it should be placed in a bag, and taken when used, and pay attention to the rainy season. of.
The above are the three major precautions for ADSS optical cable fusion. In addition, it should be noted that the optical fiber should not touch anything else before the optical fiber is spliced, because if the surface of the optical fiber is polluted by dust, it may affect its use. The quality-assured ADSS optical cable manufacturer also reminds that when using or storing optical fibers, especially bare optical fiber connectors, it is necessary to concentrate on taking relevant protective measures, such as neatly arranging them and handling them with care, absolutely not. Bending, it should also be properly fixed and protected.